Prothane Tie Rod End Boots | Multiple Fitments (19-1711)

Tie Rod End Boots by Prothane

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements.

Please Note: It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained.

Features

• Pin Opening Diameter: 12mm (0.472in)
• Base Opening Diameter: 30.48mm (1.2in)
• Height of Boot: 24.51mm (0.965in)

Benefits

• Replace old worn dust boots which are integral to proper suspension function

Applications

• 1990 – 1997 Honda Accord (CB7 / CB9 / CD5 / CD7 / CE1)
• 1994 – 2001 Acura Integra
• 1995 – 1999 Dodge Neon
• 1984 – 2000 Honda Civic (EF / EG / EK)
• 1984 – 1991 Honda CRX
• 1993 – 1997 Honda del Sol
• 1992 – 1996 Honda Prelude
• 1986 – 1991 Mazda RX7
• 1989 – 1998 Nissan 240SX
• 1970 – 1973 Nissan 240Z

What’s In The Box?

• 2 – Tie Rod Dust Boots

Warranty

• Prothane Manufacturers Warranty: Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt.”